|Anyone try connecting two C64NIC's with a crossover cable
|Page 1 of 1|
|Author:||Ragooman [ Thu Sep 16, 2010 4:59 pm ]|
|Post subject:||Anyone try connecting two C64NIC's with a crossover cable|
Anyone try connecting C64NIC's with just a crossover cable ?
I like to setup a demo at a location, but there's only WiFI available. So I was thinking about using a crossover cable to connect the two C64's together using the C64NIC+. This would work normally on a PC. As long as I set the MAC's and the IP info correctly wouldn't it work still ?
|Author:||Schema [ Thu Sep 16, 2010 6:53 pm ]|
|Post subject:||Re: Anyone try connecting two C64NIC's with a crossover cabl|
I'm 98% sure this will work. I've hooked up two C64NICs together through a $10 dumb Ethernet hub with nothing else connected and it worked fine, a crossover cable is basically the same.
|Page 1 of 1||All times are UTC + 1 hour [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group