retrohackers.com
http://retrohackers.com/

Final Cartridge III - Convert CRT to BIN
http://retrohackers.com/viewtopic.php?f=8&t=568
Page 1 of 1

Author:  mistermsk [ Fri Mar 19, 2010 4:35 pm ]
Post subject:  Final Cartridge III - Convert CRT to BIN

I would like to try putting Final Cartridge III on my MMC Replay. I found the lastest version they made (1988-12). However, I only could find it in CRT format. Anyone know what to remove to make it a proper BIN so I can send it to my MMC Replay?


Image

Author:  hollowman [ Fri Mar 26, 2010 12:14 pm ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

Vice includes cartconv.exe which can convert between crt and bin.
But IIRC then MMC Replay won't work with a final cartridge rom anyway.

Author:  Alex [ Fri May 28, 2010 11:26 pm ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

I seem to remember screenshot showing FCIII as an option in flash menu of MMC RR and I recall some discussion about it at that time. I belive there were some works in progress to make FCIII image work. Internally FCIII is a different cartridge than AR including different control registers and a bit different banking due to lack of RAM. Anyway it would be awsome to be able to run FCIII from MMC RR.

Can anyone confirm the status of FCIII for MMC RR.

Author:  Graham [ Sun May 30, 2010 7:32 am ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

AFAIK someone made an FC3 bin which works except for the freezer, and because of that stays unreleased :(

Author:  Alex [ Sun May 30, 2010 11:38 pm ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

Graham wrote:
AFAIK someone made an FC3 bin which works except for the freezer, and because of that stays unreleased :(


I guess this is due to different freezer circuit. Anyway even such 90% version would be more than welcome by many I suppose. I have to look into FCIII how freezer is implemented.

Author:  groepaz [ Wed Aug 18, 2010 5:08 pm ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

Quote:
AFAIK someone made an FC3 bin which works except for the freezer, and because of that stays unreleased

i have this version.... i couldnt make it work at all though, it doesnt even start.

Author:  DMackey828 [ Tue Dec 24, 2013 6:34 am ]
Post subject:  Re: Final Cartridge III - Convert CRT to BIN

Remove the first 5 lines of the binary. That's what I've always done with a HEX editor.

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/