It is currently Sat Nov 29, 2014 4:13 am

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: ProLogicDos Boards
PostPosted: Wed Apr 25, 2007 3:29 am 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
Goo day all....

I bought a sx-64 it has a ProLogic Dos Cart and 1541 interface with it.
Does anyone have a manual or any info on it...
Maybe a web address ...

It consits of 3 boards
A cartridge board it has 2 edge connectors on each end -- 2 cable connectors -- a female edge connector for an other cart -- large chip and a place for another 28pin chip possably eprom this i am interested in--.
2 boards that connect to the inside of a 1541 drive.. by a small blue ribbon cable...

I am going to try to install it i am looking for any info on this item..

ohh the sx-64 have a custom bios prologic dos installed do i need this to make it work if so is there a c64 version...

Any info would be welcome..

P.S the webserver is getting lots of hits http://www.c64web.com

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 25, 2007 2:49 pm 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
i have it ;)
http://www.wiwi.uni-frankfurt.de/~andreas/prologic.zip
everything explained. i have this board too, working, if you have any questions feel free to ask
masterhit


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 25, 2007 3:02 pm 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
Thanks mate i need a copy of the eprom thats missing from the cart board. Thanks

i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64....

:)

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 25, 2007 5:13 pm 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
zap wrote:
i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64....

:)


patrick van der poel offers the dumps.

http://www.pjvdpoel.demon.nl/

greetz


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 15, 2007 1:29 pm 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
masterhit wrote:
zap wrote:
i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64....

:)


patrick van der poel offers the dumps.

http://www.pjvdpoel.demon.nl/

greetz


on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom...

there dumps for this board dont appear to be on there can i get a dump of yours...

i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same...

once i get it working i plan the sell it on ebay should be collectable....

have fun shane
p.s the manuel is in ??? i am english.

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 15, 2007 1:57 pm 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
zap wrote:

on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom...

there dumps for this board dont appear to be on there can i get a dump of yours...

i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same...

once i get it working i plan the sell it on ebay should be collectable....

have fun shane
p.s the manuel is in ??? i am english.


The manual is german... as the inventor was a germ (hehe). Your empty socket on the c64 side of the system contains normally a kernal and basic rom iirc. The advantage of this setup is that you do not need to solder in your C64 (there was also sold a proloDos-system with a internal kernal replacement). 1 thing HAS to be done to get it working properly: one has to connect the cpus hiram line to a plug on the prologic Dos Cartridge.

im trying to dump tonight (not in the toilet, i mean the ROM !!!), also doing some pics of the hiram line!

HM. i recall that the roms were all in the UNEMULATED zip file on patricks site: http://www.pjvdpoel.demon.nl/Roms/Unemulated.zip

have an ice time,

masterhit


Top
 Profile  
 
 Post subject: Thanks...
PostPosted: Tue May 15, 2007 2:29 pm 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
masterhit wrote:
zap wrote:

on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom...

there dumps for this board dont appear to be on there can i get a dump of yours...

i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same...

once i get it working i plan the sell it on ebay should be collectable....

have fun shane
p.s the manuel is in ??? i am english.


The manual is german... as the inventor was a germ (hehe). Your empty socket on the c64 side of the system contains normally a kernal and basic rom iirc. The advantage of this setup is that you do not need to solder in your C64 (there was also sold a proloDos-system with a internal kernal replacement). 1 thing HAS to be done to get it working properly: one has to connect the cpus hiram line to a plug on the prologic Dos Cartridge.

im trying to dump tonight (not in the toilet, i mean the ROM !!!), also doing some pics of the hiram line!

HM. i recall that the roms were all in the UNEMULATED zip file on patricks site: http://www.pjvdpoel.demon.nl/Roms/Unemulated.zip

have an ice time,

masterhit


Thanks mate for the dump hope it did'nt hurt.. :oops:

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 16, 2007 9:33 am 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
so. dug out my prommer this morning and dumped the bitch. its a 2764
no pics yet, sry...

http://www.wiwi.uni-frankfurt.de/~andreas/prologic.bin

regards
masterhit


edit:

i checked the "unemulated.zip" file on pvdp s site: inside is another zipfile called "prodos.zip" this contains the same rom called kernal.rom ;)


Top
 Profile  
 
 Post subject: Thanks Mate
PostPosted: Tue Jun 12, 2007 2:35 pm 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
Sorry not to have got back to you sooner.

Thanks....

p.s patricks site is down ....

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject: hello
PostPosted: Tue Jun 12, 2007 3:13 pm 
Offline
User avatar

Joined: Sat Feb 10, 2007 7:30 pm
Posts: 339
Location: Brisbane Australia
email me

_________________
Commodore 8bit Web Services http://cbm8bit.com
Try our new browser driven disk image editor.


Top
 Profile  
 
 Post subject: Re: Thanks Mate
PostPosted: Wed Jun 13, 2007 7:22 am 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
zap wrote:
Sorry not to have got back to you sooner.

Thanks....

p.s patricks site is down ....


"Because of some Legal issues I’m forced to close the commodore cartridges and roms site.
My apologies to all the people who provided cartridges, roms and a redesigned website.
I’d realy want to put it online, but I simply can’t.

Patrick
"
hmpf.

well, in december i decided to give patricks site a lew look,
i sadly copied not everything....
if you want to take a look how i thought it should look ;)
http://masterhit.dyndns.org/pvdp
(aboves url is my desktop, its only active from 8 am till 7 pm)

have fun,
nils


Top
 Profile  
 
 Post subject: Re: Thanks Mate
PostPosted: Wed Jun 13, 2007 7:14 pm 
Offline
User avatar

Joined: Tue Feb 20, 2007 12:05 pm
Posts: 75
Location: Toronto, CANADA
masterhit wrote:
sadly copied not everything....

Too bad. Do you know what you missed? Maybe we can find things elsewhere and recreate the archive. A lot of the games can be found on Mayhem's website so there's no need to duplicate all of his hard work. Say, would you be willing to share what you did manage to copy? One big zip uploaded to Divshare would be useful.

_________________
Call me Golan; my parents did.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 14, 2007 9:18 am 
Offline

Joined: Sat Oct 14, 2006 9:30 am
Posts: 140
Here's a zip of masterhit's copy (hope you don't mind :):

http://www.cling.gu.se/~cl3polof/pvdp.zip


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 14, 2007 11:05 am 
Offline

Joined: Thu Jan 12, 2006 10:10 am
Posts: 177
I will check that against my copy (mirrored some time last year IIRC) when I have time.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 14, 2007 4:39 pm 
Offline
User avatar

Joined: Thu Mar 30, 2006 2:43 pm
Posts: 27
Location: frankfurt
tnt/beyond force wrote:
I will check that against my copy (mirrored some time last year IIRC) when I have time.


perfect :)
i didnt copy most of the carts.
i did copy the manuals and the roms.
so just paste your /Cartridges fodler to my archieve and we have a working copy ;)

i also found someone willing to host it :)
more l8r
masterhit


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group